Estimated Delivery: 2 to 4 working days

Campervan Covers

Maypole Ducato & Peugeot Boxer Camper Van Cover, 2 Year Warranty

Code: MYPLMP6586

Unavailable

At a glance...

  • For a wide range of campervans, including Fiat Ducato and Peugeot Boxer
  • Water-resistant, breathable, and UV-stable
  • Dimensions: L 5.9m W 2m H 2.4m
  • Elasticated hem, adjustable nylon straps, and side zip for accessing driver's and passenger's side doors
  • 4-ply bonded fabric with 3 layers of 42gsm spunbound polypropylene and water-resistant 35gsm microfilm membrane

FREE shipping on orders over £99
Surcharge applies to Highlands and Islands

Campervan Covers

Maypole Ducato & Peugeot Boxer Camper Van Cover, 2 Year Warranty

Code: MYPLMP6586

Unavailable

£114.99
RRP: £159.99
You Save: £45.00

Product Reviews

FREE shipping on orders over £99
Surcharge applies to Highlands and Islands

Features

Capacity 8 KG

Description

The exclusive 4-ply fabric gives you a cover that is highly water-resistant and breathable - keeping the water out while also allowing condensation to evaporate.

Fully UV-stable, the Maypole 4-Ply Breathable Campervan Cover has four layers of protection - three layers of spunbound polypropylene, giving optimal breathability and evaporation, and a water-resistant membrane layer that lets air in and keeps water out.

This cover is bonded using an innovative rounded pattern, helping it to resist stress and tears under normal conditions.

This Maypole cover is suitable for a wide range of campervans, including standard or high top cans, short or long wheel bases, side-mounted awnings, or if you have a rear cycle carrier or ladder.

Fitted with zips that give you access to the driver and passenger side doors, the cover has an elasticated hem and nylon securing straps for a snug and secure fit.

Suitable for a range of camper vans, including Fiat Ducato and Peugeot Boxer with:
– standard or high top
– short or long wheel base
– rear cycle carrier and ladder
– side mounted awning blind

Features:

  • Maypole’s dark grey camper van covers have additional features that are designed to improve the fit and functionality of the cover, including;
  • Reflectors on the front and rear enhances night time visibility
  • Comes with elasticated hem for a tailored fit
  • 3 straps under the vehicle
  • Handy storage bag for when not in use
  • Maypole logo on the front of the cover
  • Extra strong double stitched seam ensuring a long product life
  • Fits Fiat Ducato, Ford Transit & Peugeot Boxer
  • Dimensions – L 5.9m x W 2.0m x H 2.4m
  • Zip openings for driver & passenger doors make fitting easy
  • Fitting and care instructions provided

2 Year Manufacturer's Warranty

The two year warranty covers manufacturing faults against the straps, zips and seams. The warranty does not cover against extreme weather conditions or user wear and tear not covered by the warranty.

How do I fit my campervan cover?

Two people and the careful use of stepladders or a stable platform may be required as the cover is large, heavy and needs to be passed carefully over all sections of your camper van. WARNING : If using stepladders or a platform you will be working at height and should follow carefully the stepladder / platform manufacturer’s safety instructions. You should not attempt to fit the cover from the ladder but only to use the ladder if required to assist people on the ground.

  1. Open out the cover. The front section is clearly identified with a "FRONT" label.
  2. Unzip the door panel.
  3. Starting from the front and working towards the rear, lift the cover carefully over the roof and all protruding objects.
  4. Adjust the cover’s position until an even fit all over is achieved.
  5. Close the zip carefully and fasten the Velcro tab at the bottom.
  6. Secure the sides of the cover with the straps provided. Pass each strap under your camper van and secure to the corresponding buckle on the opposite side.
  7. Adjust all straps as required to give a good fit, including those on the rear.

Fitting My Campervan Cover

How do I fit my campervan cover?

Two people and the careful use of stepladders or a stable platform may be required as the cover is large, heavy and needs to be passed carefully over all sections of your camper van. WARNING : If using stepladders or a platform you will be working at height and should follow carefully the stepladder / platform manufacturer’s safety instructions. You should not attempt to fit the cover from the ladder but only to use the ladder if required to assist people on the ground.

  1. Open out the cover. The front section is clearly identified with a "FRONT" label.
  2. Unzip the door panel.
  3. Starting from the front and working towards the rear, lift the cover carefully over the roof and all protruding objects.
  4. Adjust the cover’s position until an even fit all over is achieved.
  5. Close the zip carefully and fasten the Velcro tab at the bottom.
  6. Secure the sides of the cover with the straps provided. Pass each strap under your camper van and secure to the corresponding buckle on the opposite side.
  7. Adjust all straps as required to give a good fit, including those on the rear.

Motorhome / Camper Van & Awning Advice

> The Benefits of Campervan Covers

Related Items

Our Brands

PayPal Pay-In-3

Buy today and pay in 3 interest free
payments with PayPal

Leisure Outlet's Price Match

Same product, in stock with another UK retailer?
Contact us to discuss.